1. Press the Menu button and select Channel Mixer.
2. Select the Pan tab in the bottom section of your display.
3. Tap the Automation Button in the top-right corner of the screen so that it turns Red.
4. Double tap on your chosen track using the onscreen blocks to open the Pan screen.
5. Press play and slide your finger left and right using the touch screen to pan your track; this will be recorded.
Alternatively, you can use Q-Link 1 or the Main Dial to turn your pan wheel left or right.
6. Once your pan automation has been recorded, tap the Automation Button again so that it turns green, then press play to hear it back.
7. If you would like to make manual adjustments to your pan automation recording; go to the Main screen, tap the button shown below, and select your previously recorded automation from the Parameter drop down menu.
